| Cut Width: | 3.94″ – 8.66″ (100 mm – 220 mm) |
| Cut Speed: | 31.5″ (800 mm) axial maximum |
| Linear Cut Speed: | Dependent on graphic |
| Cut Force: | 0 – 14.11 oz in 0.18 oz steps (0 – 400 grams in 5 gram steps) |
| Cut Type: | Drag knife and tangential emulation |
| Cut to Registration: | Single point registration mark |
| Cut Ability: | Both printed and unprinted media |
| Max. Label Length: | 12″ (304.8 mm) repeat |
| Lamination: | Unsupported laminate roll |
| Max. Roll Diameter: | 11.81″ (300 mm) |
| Waste Matrix: | Removal and rewind |
| Roll Core Size: | 3″ (76 mm) |
| Interface and Software: | WinPlot (Windows OS) cuts software, cutter-control parameter software. Plug- ins for CorelDraw and Adobe Illustrator |
| Power Supply: | Single phase 110/240VAC, frequency 50/60HZ +/- 2% |
| Width Dimension: | 39.37″ (1000 mm) |
| Depth Dimension: | 23.62″ (600 mm) |
| Height Dimension: | 30.71″ (780 mm) |
| Weight: | 220.46 lbs (100 kg) |
| Lamination: | Laminate waste removal rewind |
| Cut Width: | 3.94″ – 8.66″ (100 mm – 220 mm) |
| Cut Speed: | 31.5″ (800 mm) axial maximum |
| Linear Cut Speed: | Dependent on graphic |
| Cut Force: | 0 – 14.11 oz in 0.18 oz steps (0 – 400 grams in 5 gram steps) |
| Cut Type: | Drag knife and tangential emulation |
| Cut to Registration: | Single point registration mark |
| Cut Ability: | Both printed and unprinted media |
| Max. Label Length: | 12″ (304.8 mm) repeat |
| Lamination: | Unsupported laminate roll |
| Max. Roll Diameter: | 11.81″ (300 mm) |
| Waste Matrix: | Removal and rewind |
| Roll Core Size: | 3″ (76 mm) |
| Interface and Software: | WinPlot (Windows OS) cuts software, cutter-control parameter software. Plug- ins for CorelDraw and Adobe Illustrator |
| Power Supply: | Single phase 110/240VAC, frequency 50/60HZ +/- 2% |
| Width Dimension: | 39.37″ (1000 mm) |
| Depth Dimension: | 23.62″ (600 mm) |
| Height Dimension: | 30.71″ (780 mm) |
| Weight: | 220.46 lbs (100 kg) |
| Lamination: | Laminate waste removal rewind |
The Afinia Digital Label Finisher is the perfect compliment to an existing Afinia L-801 colour label printer, R-635 or any label printer which uses 100-220mm sized labels. It laminates, cuts and slits. If you have Adobe Illustrator or Coreldraw this will integrate perfectly with your existing plant.
